LF-RDM
产品介绍:
LF-RDM TESTER是一个多功能集一身的测试工具,是用全彩TFT显示屏,并带有触屏,机器的所有功能可以由触屏或按键独立操作,也可以由按键和触屏混合实现快捷操作。
产品特点:
三芯五芯DMX信号线检测
接收或发送midi信号
检测dmx信号的实时数值
检测DMX信号的时序参数
检测DMX信号的稳定性
可判断DMX信号是否正常
可编辑或播放chase
检测数字调光的PWM频率和占空比
支持ArtNet和sACN协议
RDM控制器功能,可用于管理支持RDM功能的灯具
产品参数:
全彩TFT显示屏
分辨率240x320像素
8GB SD卡
DMX 5芯公插输入(可转换为3芯)
DMX 5芯母插输出(可转换为3芯)
DMX接口电气标准: ANSI E1.11 / ANSI E1.20
RJ45 接口支持TCP/IP, 使用 静态IP分配
USB接口: Micro USB B类型
电池: 9V电池 (产品不含)
USB功率: 最大300mA
电缆测试: 3/5芯, 开路,短路,线路接错
工作温度: 0°C to +45°C
软件性能:
接收512个DMX信号通道
发射512个信号通道
刷新率: 10, 15, 20, 25, 30, 35, 40帧 每秒
发射中断时长: 160-180微秒 (不可配置)
发射MAB时长: 28-32微秒 (不可配置)
时序检测: 帧率 / Break / MAB
显示格式:百分比,十进制, 十六进制
DMX场景储存: SD卡, 每个场景512通道
保存程序数量: 取决于SD卡的容量
单个程序最大步数: 99
-------------------------------------------------------------------------------------
Introduction:
LF-RDM TESTER is a; is a very powerful test tool. With full-color TFT touch display, all functions can be achieved by touch display or buttons separatey or can mixed operation by; touch display and buttons.
Features:
3/5 pin DMX cable testing
Midi testing
Channel tracer
Timing analyzer
DMX signal""flicker finder;
LED PWM rate meter
Programmable sequence recording/playback
Send/receive DMX
ArtNet testing and send/receive via ArtNet
8GB MicroSD card storage
sACN support
TECHNICAL REFERENCE:
Hardware:
• Display type: Full-Color LCD
• Display resolution: 240x320 pixel
• Memory: microSD card
• DMX in port: 5-pin male connector (includes 3-pin adapter)
• DMX out port: 5-pin female connector (includes 3-pin adapter)
• DMX ports electrical standard: ANSI E1.11 / ANSI E1.20
• RJ45 port supports TCP/IP; Static IP assignment
• USB port: Micro USB B type
• Battery: 9V battery (battery not included)
• USB Power consumption: 300mA max
• Cable tester: 3/5-pin, open circuit, short circuit, wrong wiring
• Operating temperature: 0°C to +45°C / 32°F to 113°F
Firmware:
• Received DMX channels: 512
• Transmitted DMX channels: 512
• Refresh rates: 10, 15, 20, 25, 30, 35, 40 frames per second
• Transmitter break length: 160-180 microseconds (not configurable)
• Transmitter MAB length: 28-32 microseconds (not configurable)
• Timing measurement: Frames per second / Break / MAB
• Display formats: Percent, Decimal, Hexadecimal
• DMX scene storage: microSD card, 512 channels each
• Number of sequences: microSD card storage capacity dependent
• Steps in sequence: 99